CRA/HMDA Software Downloads

Version 2015 for CY 2015 data due March 1, 2016 is now available. Each software version is year-specific (i.e., 2014 reporting requires 2014 DES and not 2015 DES).

The software must be installed locally on a hard disk; it is NOT network compatible.

 

Current Version

HMDA Data Entry Software v. 2015 System Requirements
CRA Data Entry Software v. 2015 System Requirements

 

Past Versions

HMDA

HMDA Data Entry Software v. 2014 R.2 System Requirements
HMDA Data Entry Software v. 2013 R.2 System Requirements
HMDA Data Entry Software v. 2012 R.2 System Requirements
HMDA Data Entry Software v. 2011 R.2 System Requirements
HMDA Data Entry Software v. 2010 R.2 System Requirements
HMDA Data Entry Software v. 2009 R.2 System Requirements
HMDA Data Entry Software v. 2008 R.2 System Requirements
HMDA Data Entry Software v. 3.30 (2004-2007) System Requirements



CRA

CRA Data Entry Software v. 2014 R.3 System Requirements
CRA Data Entry Software v. 2013 R.2 System Requirements
CRA Data Entry Software v. 2012 R.2 System Requirements
CRA Data Entry Software v. 2011 R.2 System Requirements
CRA Data Entry Software v. 2010 R.2 System Requirements
CRA Data Entry Software v. 2009 R.2 System Requirements
CRA Data Entry Software v. 2008 R.2 System Requirements
CRA Data Entry Software v. 3.30 (2004-2007) System Requirements

File Checksums

File downloads can be verified by technial staff using the following checksums:

MD5
SHA-1

Installation Instructions

  1. The software should be installed locally; it is NOT network compatible.
  2. Locate the directory which contains the "HMDA (or CRA) DES 20XX Setup" installation package.
  3. Double-click on the installer to launch the wizard which will guide you through the installation process.


Note: To preserve your data when installing a newer release of the Data Entry Software, updates should be installed to the same location as the earlier release of the same year (e.g., CRA DES v. 2014 R.3 should be installed to the same location as CRA DES v. 2014 R2).

If installing a new year release (e.g. you are installing HMDA DES 2015 at the beginning of your reporting year), the software must be installed to a new, year-specific directory. (The software is configured to do this by default.)